Showing Slide 1 of 2
CR0400 Mini Gas Regulator
CR0400 is a small regulator for gas cutting .
Designed following internationally recognized standards EN ISO, BSP, CGA, NFE, and AS. Manufactured under ISO 9001, conforms to ISO 2503. Suit for portable gas cutting kits .
Table of Contents
Description
1.CR0400 is a small regulator for Cutting .
2.Dual scale design of pressure gauge .
3.Body and Bonet forged by brass,it ensures high strength, more safety.
4.Inlet is protected by a sintered bronze filter.
Specification
| MODEL | GAS | FLOW(L/Min) | MAX INLET PRESSURE(bar) |
| WR04001 | Oxygen | 0-25 | 250 |
| WR04002 | Acetylene | 0-25 | 25 |
* 1MPa=1000KPa=10.197kgf/cm2=145.04PSI 1M3/h=16.67LPM=35.32SCFH
Download
Q&A
Q: How do I know my regulator connection?
A: For gas regulator, there are outlet and inlet connection. you could confirm the right connection size with your gas supplier.
Q: What is the maximum safe regulator pressure for oxygen use?
A: Depending on the size of the gas tank（oxygen cylinder） and subsequent capacity may be different, but typically full pressure is about 2,000 psi and air pressure can go up to 3,000 psi. With the pressure in the tank, the Oxygen gas regulator reduces the supplied pressure to a lower, safer level for the user.
Q: Could I order according to my country standard?
A: DEM regulator design according to internationally recognized standards EN ISO, BSP, CGA, NFE and AS. Manufactured under the quality management of EN ISO 9001. DEM could offer the right type with buyer’s country standard.
Q:Could I use my own brand and sticker?
A: DEM accept OEM and ODM order .
You May Also Like
Frequently Asked Questions
Related Article
We've picked these articles just for you. We hope you find them helpful and engaging.
